Artwork

Innhold levert av Dean Showalter. Alt podcastinnhold, inkludert episoder, grafikk og podcastbeskrivelser, lastes opp og leveres direkte av Dean Showalter eller deres podcastplattformpartner. Hvis du tror at noen bruker det opphavsrettsbeskyttede verket ditt uten din tillatelse, kan du følge prosessen skissert her https://no.player.fm/legal.
Player FM - Podcast-app
Gå frakoblet med Player FM -appen!

251 – Bennett’s Exhaust Valve Rescue on his Cessna TTx

29:14
 
Del
 

Manage episode 468517407 series 1028900
Innhold levert av Dean Showalter. Alt podcastinnhold, inkludert episoder, grafikk og podcastbeskrivelser, lastes opp og leveres direkte av Dean Showalter eller deres podcastplattformpartner. Hvis du tror at noen bruker det opphavsrettsbeskyttede verket ditt uten din tillatelse, kan du følge prosessen skissert her https://no.player.fm/legal.

Bennett contacted me awhile back to see if I could lap an exhaust valve for him.

The #4 exhaust valve showed a very uneven appearance when viewed with his borescope.

Bennett flew in to KSHD one morning and we got started.

Before lapping, we checked the cylinder compression and it was 29/80… not good.

Here’s what the valve looked like:

We got to work and lapped the valve.

When we were happy with the progress, we reinstalled the exhaust valve in the valve guide and installed new valve springs and a new rotocoil, to help ensure the valve would rotate properly and provide the best possibility for a good seal between the valve and the seat.

After running the engine, we rechecked the compression, and were very pleased… it was 74/80!

Amazing!

But there’s more…

Several weeks later, Bennett emailed me, and here’s what he said:

“Dean, I am so excited I am emailing from my hangar… Looks like lapping worked great! After one flight down to Florida and back… about 3.5 hours each way, the #4 exhaust valve looks vastly improved. See before and after pics attached. Much thanks!”

And here are the before and after photos he sent:

BEFORE:

AFTER: (and keep in mind the following photo was after only about 7 hours of engine operation.)

I’m confident this exhaust valve has been rescued, and will quite possibly run normally for many more hours.

It’s always nice when we can solve these valve problems with “laparoscopic surgery” (lapping a valve in place) instead of “major surgery” (removing a cylinder.)

There’s more to this story, but I’m not going to type it out here… you can listen to the audio for this podcast and hear about the magneto issues we solved on Bennett’s engine as well.

(The magnetos on Bennett’s engine are challenging to work on due to their location and all the stuff around them, but with some persistence, it’s doable.)

Thanks Bennett, for flying down to SHD.

It was nice meeting you and working with you!


The post, “251 – Bennett’s Exhaust Valve Rescue on his Cessna TTx” appeared first at AirplaneOwnerMaintenance.com

  continue reading

159 episoder

Artwork
iconDel
 
Manage episode 468517407 series 1028900
Innhold levert av Dean Showalter. Alt podcastinnhold, inkludert episoder, grafikk og podcastbeskrivelser, lastes opp og leveres direkte av Dean Showalter eller deres podcastplattformpartner. Hvis du tror at noen bruker det opphavsrettsbeskyttede verket ditt uten din tillatelse, kan du følge prosessen skissert her https://no.player.fm/legal.

Bennett contacted me awhile back to see if I could lap an exhaust valve for him.

The #4 exhaust valve showed a very uneven appearance when viewed with his borescope.

Bennett flew in to KSHD one morning and we got started.

Before lapping, we checked the cylinder compression and it was 29/80… not good.

Here’s what the valve looked like:

We got to work and lapped the valve.

When we were happy with the progress, we reinstalled the exhaust valve in the valve guide and installed new valve springs and a new rotocoil, to help ensure the valve would rotate properly and provide the best possibility for a good seal between the valve and the seat.

After running the engine, we rechecked the compression, and were very pleased… it was 74/80!

Amazing!

But there’s more…

Several weeks later, Bennett emailed me, and here’s what he said:

“Dean, I am so excited I am emailing from my hangar… Looks like lapping worked great! After one flight down to Florida and back… about 3.5 hours each way, the #4 exhaust valve looks vastly improved. See before and after pics attached. Much thanks!”

And here are the before and after photos he sent:

BEFORE:

AFTER: (and keep in mind the following photo was after only about 7 hours of engine operation.)

I’m confident this exhaust valve has been rescued, and will quite possibly run normally for many more hours.

It’s always nice when we can solve these valve problems with “laparoscopic surgery” (lapping a valve in place) instead of “major surgery” (removing a cylinder.)

There’s more to this story, but I’m not going to type it out here… you can listen to the audio for this podcast and hear about the magneto issues we solved on Bennett’s engine as well.

(The magnetos on Bennett’s engine are challenging to work on due to their location and all the stuff around them, but with some persistence, it’s doable.)

Thanks Bennett, for flying down to SHD.

It was nice meeting you and working with you!


The post, “251 – Bennett’s Exhaust Valve Rescue on his Cessna TTx” appeared first at AirplaneOwnerMaintenance.com

  continue reading

159 episoder

Toate episoadele

×
 
Loading …

Velkommen til Player FM!

Player FM scanner netter for høykvalitets podcaster som du kan nyte nå. Det er den beste podcastappen og fungerer på Android, iPhone og internett. Registrer deg for å synkronisere abonnement på flere enheter.

 

Hurtigreferanseguide

Copyright 2025 | Sitemap | Personvern | Vilkår for bruk | | opphavsrett
Lytt til dette showet mens du utforsker
Spill