))
Episode 003 - Roland Juno 6/60
Manage episode 353104410 series 3439613
Innhold levert av Adam Anderson. Alt podcastinnhold, inkludert episoder, grafikk og podcastbeskrivelser, lastes opp og leveres direkte av Adam Anderson eller deres podcastplattformpartner. Hvis du tror at noen bruker det opphavsrettsbeskyttede verket ditt uten din tillatelse, kan du følge prosessen skissert her https://no.player.fm/legal.
Overview
The Roland Juno 6 and Juno 60 are 6-voice analog polyphonic synthesizers. While limited in functionality by today’s standards, these classics present an extremely accessible interface to synthesis newcomers; and they sound fantastic. Both lack MIDI, the Juno 6 lacks patch storage. All this means you won’t be wasting your time with complicated configurations. Just start playing.
Resources
- TAL-U-NO-LX Software emulation of the Juno 6/60
- Juno 6 Owner’s Manual
- Juno 60 Owner’s Manual
- Juno 60 MIDI retrofit
- Another Juno 6/60 MIDI retrofit
- And one more MIDI retrofit
Inspiration
In the video below, Nick Rhodes uses a Roland Jupiter 8 (I know, not the same thing) in “Save A Prayer”. Notice the use of the bender. The Juno 6/60 have the same bender. Set the bender to control the DCO at about 33% and see if you can mimic the technique. (Skip to 4:30)
Tip
And, in case you missed it in the podcast, here’s the tip for integrating a Juno 6/60 into a MIDI setup. Use either a MIDI-controlled drum machine or your DAW (Digital Audio Workstation) to send a click track (or use the rimshot output) to the Juno’s arpeggiator control input. The arpeggiator will now be synced up to the controlling device’s clock.
18 episoder
Del
